T3 - HOLDER SERIES XRP Signal
제품 상세 기록됨
전체 케이스 파일 상세 펼치기 상세 접기
RX-048
INDICATION: Chronic inability to confuse volume with signal.
DOSAGE: One layer before entering the feed. Reapply whenever noise is mistaken for infrastructure.
SIDE EFFECTS: Lower tolerance for empty momentum, compulsive route checking and a persistent preference for function.
THE SIGNAL SURVIVED THE NOISE.
The market has spent years increasing the volume.
The signal remained exactly where it was.
A restrained XRP mark sits on the left chest. The back carries the full transmission: an oversized XRP symbol split across worn white and electric blue, surrounded by distressed fields, registration marks, crosshairs and technical measurement lines.
The left sleeve carries the REKTWEAR group mark. The right sleeve continues the technical system with an extended reference graphic.
Everything has been processed through an intentionally sun-faded black finish, giving the hoodie a broken-in surface before the next cycle gets the opportunity to do it naturally.
No launch sequence.
No ceremonial countdown.
Just the symbol, the route and enough visual interference to confirm that the system is operating normally.
Built on the H2 hoodie inside the T3 Holder Series — 400GSM / 11.8 oz with an oversized, tapered silhouette. The body and sleeves carry substantial volume before drawing in at the hem, creating the heavier ballooned shape assigned to the T3 hoodie tier.
The finish looks weathered.
The position remains unchanged.
VALUE IN MOTION.
— REKTWEAR
SPECS
• 400GSM / 11.8 oz
• H2 construction within the T3 Holder Series
• Oversized / tapered silhouette
• Intentional sun-faded washed finish
• Drop-shoulder shape
• Pullover hood
• Kangaroo pocket
• Small left-chest XRP mark
• Oversized distressed XRP back graphic
• Left-sleeve REKTWEAR group mark
• Right-sleeve technical reference graphic
FIT
Oversized through the body and sleeves with a tapered hem that draws the silhouette back in.
Stay true to size for the intended T3 oversized fit. Size down if you prefer a closer, less exaggerated silhouette. Refer to the official garment measurements before ordering.
FINISH
The faded, washed appearance is intentional and forms part of the garment design. It is not accidental discoloration or evidence of prior wear.
CARE
Wash cold, inside out, on a gentle cycle. Use mild detergent. Do not bleach. Hang dry away from direct sunlight. Do not iron directly over the printed artwork.
SHIPPING
Made to order through our current fulfillment network. Delivery times vary by destination; the current estimate is shown at checkout.
NOT FINANCIAL ADVICE.
RX-SIZE // 핏 프로토콜
핏 가이드
케이스 파일 // 제품 상세
RX-048
INDICATION: Chronic inability to confuse volume with signal.
DOSAGE: One layer before entering the feed. Reapply whenever noise is mistaken for infrastructure.
SIDE EFFECTS: Lower tolerance for empty momentum, compulsive route checking and a persistent preference for function.
THE SIGNAL SURVIVED THE NOISE.
The market has spent years increasing the volume.
The signal remained exactly where it was.
A restrained XRP mark sits on the left chest. The back carries the full transmission: an oversized XRP symbol split across worn white and electric blue, surrounded by distressed fields, registration marks, crosshairs and technical measurement lines.
The left sleeve carries the REKTWEAR group mark. The right sleeve continues the technical system with an extended reference graphic.
Everything has been processed through an intentionally sun-faded black finish, giving the hoodie a broken-in surface before the next cycle gets the opportunity to do it naturally.
No launch sequence.
No ceremonial countdown.
Just the symbol, the route and enough visual interference to confirm that the system is operating normally.
Built on the H2 hoodie inside the T3 Holder Series — 400GSM / 11.8 oz with an oversized, tapered silhouette. The body and sleeves carry substantial volume before drawing in at the hem, creating the heavier ballooned shape assigned to the T3 hoodie tier.
The finish looks weathered.
The position remains unchanged.
VALUE IN MOTION.
— REKTWEAR
SPECS
• 400GSM / 11.8 oz
• H2 construction within the T3 Holder Series
• Oversized / tapered silhouette
• Intentional sun-faded washed finish
• Drop-shoulder shape
• Pullover hood
• Kangaroo pocket
• Small left-chest XRP mark
• Oversized distressed XRP back graphic
• Left-sleeve REKTWEAR group mark
• Right-sleeve technical reference graphic
FIT
Oversized through the body and sleeves with a tapered hem that draws the silhouette back in.
Stay true to size for the intended T3 oversized fit. Size down if you prefer a closer, less exaggerated silhouette. Refer to the official garment measurements before ordering.
FINISH
The faded, washed appearance is intentional and forms part of the garment design. It is not accidental discoloration or evidence of prior wear.
CARE
Wash cold, inside out, on a gentle cycle. Use mild detergent. Do not bleach. Hang dry away from direct sunlight. Do not iron directly over the printed artwork.
SHIPPING
Made to order through our current fulfillment network. Delivery times vary by destination; the current estimate is shown at checkout.
NOT FINANCIAL ADVICE.
- 부작용갑작스러운 칭찬, 원치 않은 차트 대화, 손실 화면을 캡처하고 싶은 충동.
유사 증상
Loading designs…